The install is very straight forward, please read this thoroughly to ensure there are no problems.

Install:

Remove One Engine Cover Bolt at a time and replace it with a matching bolt from our kit.  Do not attempt to install a bolt that is larger than the one you removed, serious damage could occur.  Always be sure to check for clearance first.

Do not over tighten the bolts; you could damage your engine casing.  They should be snug but not overly tight.

Use the Anti-Seize Compound included on each bolt.

Do not use Aluminum bolts in Safety Critical Areas; Aluminum bolts are great for Engine Covers, Clutch Levers, and many other applications.  They should not be used for Brakes or other load bearing applications.

If you have any questions email us at sales@LuckyBike.com