Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting signal installation. The installation difficulty will vary depending on your application; on some instances you will be removing your fairing to properly mount these Turn Signals.

  1. Locate the existing Turn Signal Wires on your Motorcycle and either unplug your current lights and plug in our turn signal lamp assembly or you may have to Splice them in. 
  2. Test the light and ensure it functions properly prior to putting everything back together. If it's good, mount the lamp unit using your existing hardware and repeat the process for the other side. 
  3. Reassemble, Ride and Enjoy! 

*Do not over-torque your mounting screws when re-installing, it should be snugged, hand-tight and not forcefully clamped down.

If you have questions please email us at sales@luckybike.com