Universal Chrome Cruiser Style Headlight Assembly
Wanting to upgrade your motorcycle look? You're going to need a reliable light that adds a special look and we carry the perfect Cruiser Headlight you need to set it off. Don't use a light that is not bright enough to light a clear path for your journey. Our Chrome Classic Headlight Lamp Low beam has plenty of brightness for your safety and also has a high beam for a little extra light. This headlight lamp has a very nice crystal clear lens with a chrome finish. This Headlight is also DOT approved with the E-Mark (E-4) Certified raised stamped lens. So if your looking to upgrade, use our cruiser headlight and dress to impress.
Dimensions: Multiple, please see photo(s)
Housing: Chrome High Impact PVC Plastic
Headlight: Clear High Impact PVC Plastic Lens
Bulb: Clear, Dual Filament, 12 Volt, 35 Watt
Plug: 3-Pin, White High Impact PVC Plastic
Wiring: 12 Volt Systems (WHITE-Negative, BLUE-Positive Low Beam, GREEN- Positive High Beam)
Fitment Information: This is a Universal headlight lamp; therefore, it has many uses and mounting possibilities. This includes, but is not limited too: Cruisers, Scooters, Enduro, Dual Sport, and Cafe Racer
Install Notes: Always test the light before installation to ensure it works properly (high and low beam). After testing, we recommend disconnecting the battery before starting this installation. The installation difficulty will vary depending on your application. Our Cruiser Headlight assembly is designed to replace your old headlight assembly. So Start by removing your existing headlight assembly. You may have to splice your existing wires to our headlight wires. Locate your motorcycles Ground wire and connect it to the headlight lamp WHITE (Negative) wire. Next locate your positive headlight wires on your motorcycle and for Low Beam connect it to our BLUE (Positive) wire and for High Beam connect it to our GREEN (Positive) wire.