One Pair - Suzuki Adjustable GP Bevel Front Foot Pegs
OEM replacement Footrests. Billet Aluminum peg and base are lightweight and durable, with an Anodized durable finish. Rearset Steps install using your existing factory OEM hardware. Able to adjust angle of Footrest
Dimensions: Multiple, please see photo(s)
Color: Anodized Black, Blue, Red, Gold or Silver
Material: 6065 Billet Aluminum
These may also fit other bikes and/or OEM part #'s, but please do your own research if replacing any OEM Part Number other than listed above.
|92-12 GSXR 600
88-12 GSXR 750
01-12 GSXR 1000
96-04 GSF600S - Bandit
01-05 GSF1200 - Bandit
97-05 GSF1200S - Bandit
Replaces OEM Part #'s (L / R): 43511-17C02 / 43521-17C02, 43531-33D01 / 43591-02F01, 43581-33E00 / 435891-33E00 for V, 43516-35F00 / 43526-35F00, 43511-40C00 / 43521-40C00, 43581-33D00 / 43591-02F00 for W, 43510-02F11 / 43520-02F11, 43501-45C00 / 43502-45C00, 43511-31E00 / 43521-40C00
Install Notes: First, please remove your current peg and do a side-by-side comparison with ours, visually inspecting pegs before installing. Contact us with any questions and do not apply Threadlocker until after you have confirmed and conducted a test fit of the base mount on your bike. After ensuring fitment and you have installed the peg base into the motorcycle peg holder mount, apply Threadlocker on the base threads. Since these are adjustable you will have to install the small Set Screw into the peg and then place the peg all the way onto the base. Once the peg is all of the way on, slowly back it off until you reach the desired angle. Hold inplace and tighten the Set Screw with the included hex wrench until it is tight and prevents the peg from rotating on the base. After your first ride you should verify the tightness of the Set Screw and Peg. Follow-up with checks during your Pre-Ride Inspections (T-CLOCS). Enjoy the ride!