Dimensions: Multiple, please see photo(s)
iOS Compatibility: Requires iOS 4.3 or later. iPhone 4S, 5, 5S, iTouch 3rd & 4th Generation, and iPad.
Receiver Housing: Black High Impact Plastic, Water Resistant
Strips: 10x Waterproof, Black Backing, Clear Silicon Cover, High Impact Plastic Plugs,
Wire Length approx 58 1/2 inch, 6x Red Green Blue (RGB) Surface Mount Device (SMD) per Strip
Wired Remote: Black High Impact Plastic, Water Resistant, Wire Length approx 57 inches from Receiver Plug
Adaptor Harness: Squid Style Adaptor, High Impact Plastic Plugs,
Wire Length approx 35 1/2 inches from Receiver Unit
Wiring: 12 Volt Systems, Red Wire (Positive) with Inline Fuse (10A), Black Wire (Negative),
Wire Length approx 45 inches from Receiver Unit.
Optional Switch: Install to completely cut off power to the Receiver (optional, recommended and provided)
Install Notes: Detailed installation instructions included in box.
Limited Warranty: We warranty all of our LED Kits to be free of Manufacture Defects for 30-days from order processing date. We will replace any defective parts within this time frame. Be sure to test the light kit before installation for defects and then follow the instructions provided. We cannot warranty modified or improperly installed Kits.
Fitment Information: Universal 12v System - Sportbikes, Cruisers / Harleys, Dual Purpose / Enduros, ATV / Quad, UTV's, Side by Sides, Golf Carts and Scooters. You can even dress up your Car / Truck Interior, Bed, or Engine Compartment.
Simply download the FREE application from the iTunes Store. Power on the Kit and activate the App, which will should ask to turn on your phones Bluetooth. Once conneted you can customize colors and actions via the App menu and settings.
- SOLID COLOR: to select a color, touch any color on the color wheel or you can slide the RGB sliders.
- FADE: a smooth, blended change from one selected color to the next selected color. Colors Choices: Dark Red, Green, Dark Blue, Yellow, Pink, Aqua, White. Touch the "Fade" button to enter pattern setting for up to 7 colors, how many times to Repeat the color and the Delay seconds between each color.
(Example: Select Yellow with Repeat=1, Green with Repeat=2, and Orange with Repeat=1, and a Delay=2. Unit will fade Yellow on/off and pause 2 seconds, fade Green on/off and pause 2 seconds, fade Green on/off and pause 2 seconds, fade Orange on/off and pause 2 seconds. Then cycle starts over. You can still change the overall speed from the Main screen Fade bar.
- FLASH: a Strobe effect produce by a set number of flashes and a set time pause. Touch the "Flash" button to preset how many times to flash a color and Delay time.
(Example: Set preset Repeat=3 and the Delay=2. Color will flash 3 times and pause 2 seconds. Then cycle starts over. You can still change the overall speed from the Main screen Flash bar.)
- LOOP: a quick switch from one selected color to the next selected color. Colors Choices: Dark Red, Green, Dark Blue, Yellow, Pink, Aqua, White, Light Blue, Dark Green, Dark Orange, Light Red, Red, Pink Dark Violet, Violet. Touch the "Loop" button to enter pattern setting for up to 15 colors, how many times to Repeat the color and the Delay seconds between each flash of color.
(Example: Select Red with Repeat=1, Green with Repeat=2, and Pink with Repeat=1, and a Delay=2. Unit will display Red pause 2 seconds, display Green pause 2 seconds, display Green pause 2 seconds, display Pink pause 2 seconds. Then start the cycle over again. You can still change the overall speed from the Main screen Loop bar.
- ON/OFF: Turn lights on and off
- MUSIC/LED: Touch to switch to between Music Sync Mode or Color Control Mode. Music Sync Mode is for controlling the LED by the beat of the music or the sound from the phones Microphone. Color Control Mode is the Solid, Fade, Flash, and Loop Functions.
- MIC Checkbox: Touch to switch between Mic Sync and Music Sync. Mic Sync pulses the light to the sounds picked up from the microphone. Music Sync pulses the lights to the music beat provided by your phones media player.
- WIRED REMOTE (Optional): An optional wired remote is included with your android kits. You can now control your led kit in the absence of your bluetooth device. Press and hold On/Off button to turn your lighting system on/off. With power on, quickly press and release the ON/OFF button to change through 15 solid color options. At any point, users can take control of their device with their iLED App. The iLED app will override the manual wired remote control.
- WIRED SWITCH (Optional): The system has a low, constant standby current draw. If the bike will be sitting unused for days, has electrical issues, or has an older Battery then we suggest the installation of the small Main Power Switch provided. We recommend connecting this in-line using the Negative wires.