One Pair - Black Round Suzuki Front Foot Pegs
OEM replacement Footrests. Billet Aluminum peg and base are lightweight and durable, with an Anodized durable finish. Rearset Steps install using your existing factory OEM hardware.
Dimensions: Multiple, please see photo(s)
Color: Anodized Black, Blue, Red, Gold, Silver or Titanium
Material: 6065 Billet Aluminum
These may also fit other bikes and/or OEM part #'s, but please do your own research if replacing any OEM Part Number other than listed above.
92-14 GSXR 600
|2009 SFV650 - Gladius
96-04 GSF600S - Bandit
05-10 GSF650S - Bandit
01-05 GSF1200 - Bandit
97-05 GSF1200S - Bandit
07-12 GSF1250S - Bandit
04-12 DL650 - V-Strom
02-12 DL1000 - V-Strom
Replaces OEM Part #'s (L / R): 43511-17C02 / 43521-17C02, 43531-33D01 / 43591-02F01, 43581-33E00 / 435891-33E00 for V, 43516-35F00 / 43526-35F00, 43511-40C00 / 43521-40C00, 43581-33D00 / 43591-02F00 for W, 43510-02F11 / 43520-02F11, 43501-45C00 / 43502-45C00, 43511-31E00 / 43521-40C00
Install Notes: First, please remove your current peg and do a side-by-side comparison with ours, visually inspecting pegs before installing. Contact us with any questions and do not apply Threadlocker until after you have confirmed and conducted a test fit of the base mount on your bike. After ensuring fitment and you have installed the peg base into the motorcycle peg holder mount, apply Threadlocker on the base threads and screw the peg onto the base. Wrap a cloth around the peg to ensure that you do not scratch the peg when tightening. Be sure you have plenty of material between the peg and your wrench to protect the aluminum peg. Slowly tighten the foot peg onto the base, ensuring you apply enough pressure to snug the peg onto the base to prevent the peg from unscrewing. After your first ride you should verify the tightness of the peg. Follow-up with checks during your Pre-Ride Inspections (T-CLOCS). Enjoy the ride!