Click on above image to view full picture

  • Suzuki Turn Signals Plug Adapter

Suzuki Turn Signals Plug Adapter

Regular Price: $12.90

Special Price: $6.95

Availability: In stock


One Pair - Suzuki Turn Signal Wire Adapter Plugs
Front / Rear Square Connector

This Marker Wire Adapter plug connector allows you to exchange your OEM indicators for aftermarket blinkers with a simple plug n play install. Check your plugs to ensure connector style needed prior to purchase. This is a two wire connector; your system may have a three wire signal, this plug will delete the running light unless your system has the 3rd wire connected separately.  

Two wire adapters (one for right side / one for left side)
Plug: OEM Direct Fit Plug
Wiring: Two Wire, 12 Volt Systems, Length is approximately 8.5 inches
May also fit other bikes. Please do your own research if replacing on a bike other than listed below.

Fitment Information:


97-03 GSX-R600
96-03 GSX-R750
01-04 GSX-R1000
99-07 GSX1300R Hayabusa       
97-01 TL1000S
98-06 GSX600F Katana
98-06 GSX750F Katana
00-03 GSF600S Bandit
01-05 GSF1200 Bandit
01-05 GSF1200S Bandit
01-02 GS500
03-08 SV650
03-08 SV650S
03-07 SV1000
03-07 SV1000S
00-14 DRZ400S
05-08 DRZ400SM

97-00 GSX-R600
96-99 GSX-R750
04-05 GSX-R600
04-05 GSX-R750
03-04 GSX-R1000
97-01 TL1000S
98-03 TL1000R
99-02 SV650
99-02 SV650S


Install Notes: We recommend disconnecting the battery before starting any electrical installation. The installation difficulty will vary depending on your application (fairing and wire location). You'll need to locate the existing Turn Signal Wires on your Motorcycle and remove your OEM flashers by unplugging them. Install your other lights and connect them to our wire adapter plugs bullet connectors. Then connect the adapter plug into the OEM plug coming from your bikes harness. We recommend reconnecting the battery and testing the lights before reinstalling the fairings.