These Turn Signal offer an incredible value. Lots of LED's will make them very bright. They mount using a 10mm mounting stud, this gives them alot of mounting flexebility and easy install.
They feature 18 High Intensity LED's in each Signal, Bright enough to get you noticed even on Sunny Days.
These Lights are E11 E-Mark Certified
LED's draw less current than Conventional Bulbs.
This can cause the signals to blink faster than usually.
We reccomend adding a Resistor to correct the current drop.
One Pair (2) of LED Turn Signals
Wiring: Two Wire, 12 Volt Systems
Bulb: (Amber) 18 High Intensity LED's - 12V 2W (Resistor Reccomended)
Install: Universal Signal, will fit many different bikes, installation will vary, may require modification.
Dimensions: 2 3/4" Long (not including metal mounting stud)
Lenses Measure 2" Long 1" Wide
Stalk is 3/4" Long (Without Mounting Stud)
Mounting Stud is 10mm DIA and 16mm Long
This is a Universal item. Additional modification might be needed to fit your ride.