Suzuki GSX-R LED Rear Tail Light with Integrated Turn Signals - Smoked
E-Mark Certified LED Integrated Rear Brake Light / Turn Signal Combo Lamp Unit. Replaces the entire OEM Taillight Assembly; Lens, Backing Plate, Bulbs and Sockets. No cutting, drilling or modification to the Gixxer plastics when installing these with your existing OEM Hardware, but you may need to splice the wires.
OEM Direct FitmentBase:
High Impact PVC PlasticLens:
Smoke High Impact PVC PlasticLED:
Five Wire, 12 Volt Systems
Replaces OEM Part # 35710-21H30
07-08 GSXR 1000
LED Turn Signals draw less power than Conventional bulbs. Due to this LED Integrated Tail Lights may cause your Turn Signals to flash at a higher rate. To correct this Hyper Flashing we recommend using our optional Flash Controllers or LED Relays from our store.
: Always test the lights before installation to ensure they work properly. After testing, we recommend disconnecting the battery before starting electrical installation. The installation difficulty will vary depending on your skill set. Remove the bikes rear frame cover and remove your current light assembly and replace with ours using your existing screws and bolts. Plug your bikes existing wires into unit (may require slicing wires together). Test the light and if it's good; Reassemble, Ride and Enjoy! Do not over-torque the mounting screws, it should be snugged, hand-tight and not forcefully clamped down.